It’s important to study up on paint preparation tips before you take on the job of painting in your home. How your paint looks on your walls will have a lot to do with how well you prepared your walls before you began. If you want to do your best to avoid bumps, bubbles, streaks, colour bleed, and more, you’ll need to take the right preparation steps to paint a house.
If you want your paint to be durable, look it’s best and last you’ll want to be sure to have the patience and time to properly you have to Prep a House For Painting.
We know the exciting part is picking out colours, and even that moment when you see your favorite colour first rolled onto your walls. But, it’s best to avoid the temptation to move too quickly. Heed our advice and your walls will look tip top for years to come.
Paint Preparation Tips From The Pros
Steps to Paint A House
How to prep a house for painting interior? You probably know you need to prime and paint your walls. You might even know you have to fill the holes and sand them down again. But, there’s more to prepping your walls for painting than simply filling, taping, priming and painting.here is Paint Preparation Tips:
Pick and Try Your Colour
It’s important to not solely rely on the expertise of the paint store employee or what looks great in a friend’s house.
The best way to know if a color is right in your space is to take a sample home. You can take a swatch home and tape it to the wall to see how it works in the space and with the lighting at different times of the day. Or, paint a small area on your wall. Or, you can paint on a piece of wood or drywall and lean it up against your wall. Paint looks different depending on the space and lighting so you want to check it out at various times of the day.
Protect Your Room
Move as much of your furniture out of the way as possible. Or, cover your furniture and move into the centre of each room. Tape over light switches. Cover door hardware with painter’s tape.
Repair the Walls
If there is any flaking or bubbling paint you will want to scrape it off using a putty knife. If your home was built before 1978 you will first want to check if it is lead-based paint. If your home tests positive for lead paint it is recommended you call a professional.
You will want to apply spackle over any small holes in the wall. After it is dry and smooth.
For larger holes, you will want to use a patch kit. Follow the instructions on the kit.
Clean the Walls
It’s important you paint over a clean surface. Using warm water and soap, wipe down all the walls and baseboards you will be painting.
Some professional painters are able to paint an entire house or condo without using painter’s tape. But, if you’re painting yourself, you will want to apply tape around the baseboards, ceilings, and switches to ensure clean lines.
Primer isn’t always needed and some quality paint products have a built-in primer. If you are painting over repaired areas, high gloss finishes or dark colours you will want to be sure to prime your walls first. Be sure to let dry.
Apply an even coat of paint. Let dry. If necessary apply a second coat of paint.
The Paint Preparation Tips Nobody Tells You
Use A Tinted Primer!
If you paint right over drywall or paint compound, it will suck the moisture out of the paint and cause a problem called flashing. To avoid this, it’s important to prime the walls before painting. Instead of using white primers, professional painters will often tint the primer grey or to a colour that is similar to the finished paint.
A good paint job will last longer and look better. One of the best ways to ensure your paint looks it’s best and lasts long is to properly Prep a House For Painting.